SHED SITE PREP IN ELIOT & YORK, ME
MAKE SURE
YOUR SHED IS SOLID
DON'T CUT CORNERS WITH SHED SITE PREP SERVICES IN DOVER, NH
If you've recently purchased a Reeds Ferry shed (or another trusted brand), you may be wondering how to install it properly. Shed site prep is one of the most important parts of this process. If your shed is set up on unstable ground, it won't last for very long.
That's why you should hire Northern Home & Excavation, LLC for Reeds Ferry shed site prep in Dover, NH. We have the experience and knowledge required to give your shed a solid foundation. Call today for a free project estimate.
YOU'LL BE READY TO
INSTALL YOUR SHED IN 3 SIMPLE STEPS
Wondering what to expect when you hire us for Reeds Ferry shed site prep? We will Prep the land for a stable level frame to support your new shed for years to come:
Compacting the land, stripping the vegetation for the frame.
Building a frame for the shed to sit on. The frame is a pressure treated wood frame is assembled, screwed together and the material in the frame is compacted every 6 inches. This gives you a maximum amount of drainage for the shed. A stable surface for it to sit on (power is available at an additional cost).
We use this shed site prep technique to exert external pressure on the frame of your shed, holding it in place and protecting against damage. Reach out today to schedule an appointment.
Call or text for an appointment :
(207) 517-0800
HOW TO PREPARE YOUR SHED SITE
Follow our step-by-step guide!
- SUB BASE: Strip vegetation, dig under frame (under frame), put in gravel, then wet & compact (2500 psi)
- BUILD FRAME: We use 4x6 Pressure Treated Lumber Screwed together (corners box screwed) with 10" to 12" Timber screws
- (within a fraction of an inch of level)
- BASE: Grading in 3/4" Gravel in frame & around the frame to hold everything nice & tight
- BASE: Is wet & compacted (2500 psi)
- TOP COAT: Grading in 3/4" Crushed Stone, Screetted for Shed to sit on
- FINISHED LOAMING SITE: The option for the customer is for us to finish loam & rake out (ready for seed) the area around the shed site & tracks in
- POWER: Many clients request power out to the shed. NH&E digs the hole, Sand lines it with a 6" to 8" base, and put In Conduit (for the Electrician)
- Ready for inspection
- After inspection backfill can be done